OPTIONS for Automotive Transient Surge Simulator
MODEL ISS-7600 Series  conforming to ISO7637-2

For additional product information, please download the  ISS-7600 series brochure.
  ISO7637-2 EMC Test System ISS-7600 (1027KB)

SOFTWARE: ISS-7601  Supporting Model: ISS-7600 series ISS-7601 is software to diversely run, control and support the ISS-7600 series Automotive Transient Surge Simulator System.  Easily creates and manages tests and sequence of tests. Controls ISS-7600 series by a PC. Capable of controlling each pulse generator unit. Edits, saves and recalls test conditions. Test report generation with preview or printout capability     Pulse Setting Screens USB Optical Module Kit MODEL: 07-00022A    Supporting Model: ISS-7600 series This is a connecting adaptor to remote control the ISS-7600 series simulator by a PC. Contents: USB-Optical adapter, optical Fiber Cable 5m COUPLING CLAMP MODEL: ISS-7630-Cup  Supporting Model: ISS-7630 Coupling clamp for testing for lines other than supply lines. Capacitively couples 3a and 3b pulses into the lines under test. Contents: Coupling Clamp, BNC Coaxial Cable 0.5m, BNC Coaxial Cable 0.1m, 50ohm 5W Terminator, Metal Fasteners Parameters Specifications Coupling harness measurements 4mm ~  40mm Diameter Pulse Voltage Insulator Strength over 600V VSWR less than 1.3 (~200MHz) Input/Output connector BNC-R Operating temperature and humidity  23°C±5°C / 25~75% (No dewing shall occur.) Dimensions (W) 1200 X (H) 70 X (D) 300 mm Weight Approx. 3.5kgs Terminator 500 ohm ±5ohm        5W Standard accessories Instruction manual Coaxial cable (to connect with simulator) Coaxial cable (to connect to terminator) Terminator Metal fittings (for ISS-7630) Options Waveform Verification Attenuator under matched conditions Model: 00-00006A Waveform Verification Attenuator under no load conditions Model: 00-00007A

Waveform Verification Set Model: 06-00059A

• A set of resistors and attenuators required for measuring Test Pulse1/Test Pulse 2a/Test pulse 2b/Test Pulse 3a/Test Pulse 3b/Test Pulse 5a from ISS-7610, BP4610, ISS-7630 and ISS-7650.
• Contents: 1ohm, 2ohm, 10ohm and 50ohm resistors, 2.5kohm 40dB attenuator and 2 x 50ohm 20dB attenuators

Waveform Verification 1 ohm Load Model: 06-00060A

• Resistor required for measuring Test Pulse 2b from BP4610.
• Contents: 1ohm Resistor and connecting cables (Pulse 2b 12V)

Waveform Verification 2 ohm Load Model: 06-00061A

• Resistor required for measuring Test Pulse 2a/Test Pulse 2b/Test Pulse 5a from ISS-7610, BP4610, and ISS-7650.
• Contents: 2ohm Resistor and connecting cables (Pulse 2a/Pulse 2b 24V/Pulse5a)

Waveform Verification 10 ohm Load Model: 06-00062A

• Resistor required for measuring Test Pulse 1 from ISS-7610.
• Contents: 10ohm Resistor and connecting cables (Pulse 1 12V)

Waveform Verification 50 ohm Load Model: 06-00063A

• Resistor required for measuring Test Pulse 1 from ISS-7610.
• Contents: 50ohm Resistor and connecting cables (Pulse 1 24V)

Waveform Verification Attenuator under matched conditions MODEL: 00-00006A
   Supporting Model: ISS-7630

• Two pieces of attenuators required for measuring high frequency and high voltage Test Pulse 3a/Test Pulse 3b from ISS-7630.
• Contents: 2 pieces x 50 ohm 20dB attenuator

Waveform Verification Attenuator under no load conditions MODEL: 00-00007A

• Attenuator required for measuring high frequency and high voltage Test Pulse 3a/Test Pulse 3b from ISS-7630.
• Contents: 2.5 kohm 40dB attenuator

Warning Light MODEL: 11-00008A
   Supporting Models: ISS-7602, 7650

• Warning light warning the presence of high voltages during testing.

For further information, please contact us at sales@noiseken.com.
Designs and specifications are subject to change without notice.