Automotive Transient Surge Simulator
For additional product information, please download the ISS-7600
series brochure. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
---ISS-7610 (Pulse1, 2a Generator) ---ISS-7630 (Pulse3a,3b Generator) ---BP4610 (Pulse2b,4 Generator) ---ISS-7690 (Coupling Network) ---ISS-7650 (Pulse5a,5b Generator) |
FEATURES
Designed to meet and exceed the testing needs to ISO-7637-2 (2004), NoiseKen ISS-7600 series Automotive Transient Surge Simulator System offers flexible and productive testing facilities.
- Highly accurate output waveforms
- Waveforms guaranteed not only at the output terminal of each generator but also at the output terminal of the Coupling Network.
- Capable of running either as a system or as individual generators.
- PC Remote Control Software (ISS-7601) can control ISS-7600 through USB interface connection.
- Supports 12V/24V/42V systems
- 60V/50A Coupling Network
- Up to 200A Power supply available.
- Electric shock-free safety plugs are used for every output terminal.
- Load resistors meeting the loading conditions (specified in Annex D of the standard)for the verification of the output characteristics optionally available.
- Equipped with a high accuracy current monitor. An oscilloscope allows measurement of the current waveform flowing into the DUT. Current and voltage waveforms can be examined at the same time with an oscilloscope because the current monitor output circuit is floating with respect to the SG and FG. The monitor’s frequency response characteristic is from DC to 150kHz.
- Japanese software is also available.
SPECIFICATIONS
 MODEL: ISS-7610 (Pulse 1, 2a Generator)
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Pulse 1 |  |
|---|---|
| Pulse 2a |  |
MODEL: ISS-7630 (Pulse 3a, 3b Generator)- Pulse 3a and Pulse 3b generating unit
- A built-in 60V/30A Coupling Network allows independent operation.
- <3.5ns rise time pulse available
- Runs in pulse repetition frequencies sweep mode from 1 kHz to 100 kHz (ISS-7601 software required)
| Parameters |
Specifications (Pulse 3a. 3b) |
||
| Output Voltage (Us) | Pulse 3a | - 20 ~ -350V ±10% ( -1V step) |
|
| Pulse 3b | 20 ~ 350V ±10% (1V step) | ||
| Output Resistance (Ri) | 50 ohm | ||
| Duration (td) | 150ns±45ns | ||
| Rise time (tr) | Set as 5n | 5ns±1.5ns (Us=±20V~±350V) | |
| Set<3.5ns | Below 3.5ns (Us=±50V~±300V) | ||
| Pulse period (t1) | 10µs ~ 999µs ±10% (1 µs step) | ||
| Pulse period (t4) | 1ms ~ 100ms ±10% (1ms step) | ||
| Pulse period (t5) | 9ms ~ 999ms ±10% (1ms step) | ||
| Test Time | Set min | 1min ~ 999 min ±10% (1ms step) | |
| Set sec | 1s ~ 999 s ±10% (1s step) | ||
| Circuit Breaker | Rated Current 40A | ||
| Interlock | External input: Control at contact point or Open Collector L Level: 0~0.4V H level: 2V~4V |
||
| Remote control from PC |
Interface | Option: Optical Interface Unit Model: 07-00022A | |
| Software | Option: Remote Control Software Model: ISS-7601 | ||
| Compatible OS | Windows XP | ||
| DUT capacity | DC60Vmax, 30Amax | ||
| Power supply | AC100V, 110V, 120V, 200V, 220V, 240V ±10% (50/60Hz) | ||
| Operating temperature and humidity | 23°C±5°C / 25~75% (No dewing shall occur.) | ||
| Dimensions | (W) 430 X (H) 200 X (D) 522 mm (Projections excluded) |
||
| Weight | Approx. 17kgs | ||
| Power consumption | Approx. 110VA | ||
| Standard accessories | Instruction manual Replacement Fuse (3.16A) Interlock plug DC Input Cable (2m) Output cable (0.5m) BNC conversion adapter 50 ohm coaxial cable with BNC GND cable Short lead cable (for waveform verification) |
||
| Pulse 3a |
 |
|---|---|
| Pulse 3b |
 |
MODEL: BP4610 (Pulse 2b, 4 Generator)- Pulse 2b and Pulse 4 generating unit
- +-60V 10A DC – 150kHz built-In bipolar amplifier
- Functions as the DUT power supply for testing with the other pulses.
- Upgradeable to 15A or 30A by use of an optional external power supply
| Parameters |
Specifications (Pulse 3a. 3b) |
||
| Pulse 2b | UA, Us (*) | 0V ~ 60.0V ±10% ±0.5V in steps of 0.1V | |
| Ri | 0 ohm ~ 0.05 ohm | ||
| Td | 0.1s, 0.2s, 0.5s, 1s, 2s, 4s ±20% | ||
| t12, tr, t6 (*) | 1ms, 2ms, 5ms ±50% | ||
| Pulse 4 | Us | 0V ~ 60V ±10% ±0.5V In steps of 0.1V | |
| Us, Ua | 0V ~ -Ub ±10% ±0.5V In steps of 0.1V | ||
| Ri | 0 ohm ~ 0.02 ohm (Factory setting) | ||
| t7, t8, t10, t11 (*) | 1ms ~ 999ms ±10% In steps of 1ms | ||
| t9 | 0.1s ~ 99.9s ±10% In steps of 0.1s | ||
| Dimensions | (W) 430 X (H) 177 X (D) 550 mm (Projections excluded) |
||
| Weight | Approx. 26 kgs | ||
Please contact us for details of 100A and 200A types.
| Pulse 2b |
 |
|---|---|
| Pulse 4 |
 |
MODEL: ISS-7650 (Pulse 5a, 5b Generator)
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Pulse 5a | 12V system | 24V system | |
| Output Voltage (Us) | 20V ~ 100V±10% (0.5V step) | 20 ~ 200V±10% ( 0.5V step) | |
| Output Resistance (Ri) | 0.5 ohm ~ 8 ohm (0.5 ohm step) | 1 ohm ~ 8 ohm (0.5 ohm step) | |
| Duration (td) | 40ms, 100ms, 200ms, 350ms, 400ms ±20% |
100ms, 200ms, 350ms, 400ms ±20% |
|
| Rise time (tr) | 10ms-5ms/ +0ms | 10ms-5ms/+0ms | |
| Pulse 5b | 12V system | 24V system | |
| Output Voltage (Uss) | 10V ~ 40V ±10% (0.1V step) | ||
| Open Voltage (Us) | 100V>=Us>Uss | 200V>=Us>Uss | |
| Rise time (tr) | 10ms (+0, -5ms) | ||
| Duration (td) | Varies dependent on Pulse 5a (1ms step) | ||
| Pulse 5a |
 |
|---|---|
| Pulse 5b |
 |
MODEL: ISS-7690 (Coupling Network) MODEL: ISS-7602 (System Rack) - System rack that all pulse generating units can be mounted on. (ISS-7602)
- ISS-7690 Coupling Network unit centralizes all pulse outputs of the system-configured generators in the single output port.
- Software selectable pulse generators and DC supplies
- A built-in 60V 50A Coupling Network.
- In addition to the built-in DC power supply (BP4610) and two external power supplies (battery) connections available
- Switches three independent power supplies (BP4610 (LINE 1), LINE 2, LINE 3)
- A high speed DC interruption switch with <1μs fall time capability is standard built-in
- All the system can be controlled through USB interface.
| Parameters |
Specifications |
||
| DUT Capacity | 60V/50A | ||
| DC Input | 2 channels (DC supply/Battery) | ||
| Pulse input | Pulse 1, Pulse 2a/2b, Pulse 3a/3b, Pulse 4, Pulse 5a/5b | ||
| Supply interruption test | <1μs fall time (available with DC supply interruption test only) |
||
| Current Monitor | Monitoring Terminal (BNC), Output 10mV/A, DC to 150kHz | ||
| Dimensions of rack | (W) 555 X (H) 1800 X (D) 790 mm (Projections excluded) |
MODEL: AS-161 Series (High Speed Bipolar Amplifier)
| Models |
Specifications |
||
| AS-161-30 | DC-15V-+60V 15A Max/30A peak Frequency Response Characteristic: DC~150lHz |
||
| AS-161-60 | DC-15V-+60V 30A Max/60A peak Frequency Response Characteristic: DC~150lHz |
- Please contact us for details of 100A and 200A types.
- Withstanding capacitance is 100μF or less.
- This product is manufactured by NF Corporation.
- When AS-161 Series is used with ISS-7600 series, it is necessary to make alterations to ISS-7600 series main units.
Options|
|
