Optional accessories for the ESS-2000AX

ESS. PDF (2362KB)

	Automatic ESD Eliminator Model: 01-00013A
	Click here for enlargement	Connected to the ESS-2000AX simulator main unit, Automatic ESD Eliminator automatically removes residual charge on the EUT.   A control signal from the ESS-2000AX turns on the switch of the eliminator to drain away the residual charges to the ground.  Two operation modes are provided: turn-on after each discharge and turn-on after preset number of discharges (not compliant with the standard.) Max. elimination voltage: 30kV Elimination resistance: 470k ohm+470k ohm=940K ohm Hot side cable length: 2m GND side cable length: 2m AUT connecting cable length: 2m Dimensions: (W)85x (H)60 x (D)150 mm (except any projection) Weight: Approx. 1.1 kgs
	Gun Holder Model: 03-00056A
				A gun holder can be screwed to the left-side panel of ESS-2000AX and can hold the Discharge Gun (Models: TC-815R). Usage example The discharge gun held with the gun holder
	03-00056A usage example (The discharge gun held with the gun holder)
	Warning Lamp  Model: 11-00008A
	AUX connector junction box  Model: 05-00052A
				Warning Lamp and Automatic ESD Eliminator options and external Trigger circuit can be simultaneously connected.
	Optical USB module Model: 07-00022A
				Optical conversion adapter to be free from the EM interference when communicating with PC.
	Optical RS232 module Model: 07-00017A
				Optical conversion adapter to be free from the EM interference when communicating with PC.