ESD Test Environment
Model ESS-801GL Conforming to IEC 61000-4-2

For additional product information, please download the ESS series brochure. ESS Series2008. PDF (2362KB)
ESS-801GL
ESS-801GL
(Vertical coupling plane&Cable with resistors)
Click here for enlargement.

GENERAL

The Test Environment Model: ESS-801GL is testing equipment used for discharge immunity tests for floor-standing equipment in accordance with IEC 61000-4-2 standard.


FEATURES

  1. It can be used for conducting tests for floor-standing equipment to IEC 61000-4-2 standard in combination with Electrostatic Discharge Simulators (Models: ESS-20000AX or ESS-2002EX) made by us.
  2. Wooden insulation pallet minimizes the loss of energy produced by the simulator and the loss of high-frequency electromagnetic field, resulting in excellent determination and reproducibility.


CONSTITUTION OF ESS-801GL


Description and Model Specifications Quantity Material
Insulation pallet
Model 03-00024A		 Dimensions:
(W)1200x(H)1200x(t)100 mm
 1 piece Wood
Ground plane
Model: 03-00007A		 Dimensions:
(W)1800x(H)1000x(t) 1.5 mm		 1 set
(3 pieces) 		Aluminum
Floor standing vertical coupling plane
Model: 03-00034A		 Dimensions:
(W)540x(H)1540x (D)500 mm
 1 piece As listed below
Cable with discharge resistors
Model: 05-00054B		 470k ohm x 2 (resister value)
Length: 2000mm		 1 piece

  • Vertical coupling plane (Model: 03-00034A) and cable with discharge resistors (Model: 05-00054B)
NO Description Qantity Material and others
1 Base 1 piece Wood
2 Column 1 piece Wood
3 Center adaptor 1 piece Delrin
4 Clamp set plate 1 piece Bakelite
5 Clamp 4 pieces Bakelite
6 Sliding column 1 piece Wood
7 Plate A 3 pieces Bakelite
8 Plate B 3 pieces Bakelite
9 Vertical coupling plane 1 piece Aluminum, 500 x 500 x (T)1.5 mm
10 T-plate 1 piece Bakelite
11 Cable with discharge resistors
Model: 03-00054B		 1 piece  Resistance: 470K OHMx2,
Length: 2000mm
12 M3 flat head screw 14 pieces (spare 2) For assembling plates A and B
13 M4 flat head screw 14 pieces (spare 2) for assembling T-plate at clamp
14 M4 screw with washer 3 pieces (spare 1) for connecting discharge resistance cable
15 Wing nut 1 piece Attached to(1)base, for assembling base
16 M4 nut 3 pieces (Spare 1) For connecting discharge resistance cable
17 M8 SP washer 1 piece For assembling base
18 M8 flat washer 1 piece For assembling base



TEST SET-UP EXAMPLE




For further information, please contact us at sales@noiseken.com.
Designs and specifications are subject to change without notice.