IMPULSE NOISE SIMULATOR
INS-4020/4040
For additional product information, please
download the INS series brochure. INS-2005.PDF (1516KB)
 Options
Injection unit
FEATURES
Impulse Noise Simulator INS-4020/4040 are
more convenient and user-friendly than former
models, thanks to the following features.
- Push button setting for all parameters
- Terminal block outlet panel
- Sweep operation for output voltage, phase
angle and repetition cycle
- Up to 5 test settings stored in the momory
- Floating output
- Coupling mode selection by plugging the supplied
coaxial connector to the selected
port
- Easily changeable mercury relay
- Built-in 50 ohm terminator
- Easily changeable outlet panels
- CE marked
SPECIFICATIONS
| Item |
Model |
| INS-4020 (2kV) |
INS-4040(4kV) |
| Output voltage |
0.01 ~ 2.00KV ±10% with 50 ohm load,
10V step, Sweep mode available |
0.01 ~ 4.00KV ±10% with 50 ohm load,
10V step, Sweep mode available |
| Polarity |
Positive or negative |
| Square wave |
Pulse width |
50ns, 100 ns, 200ns, 250ns, 400ns, and any
combination thereof, maximum width, 1µs
or 10ns±3ns (the shortest connection) |
| Pulse rise time |
< 1ns |
| Output impedance |
50 ohm system (53.5 ohm) |
| Pulse repetition mode |
Variable |
10ms ~ 999ms±10%, 1ms step
Sweep operation available |
16ms ~ 999ms±10%, 1ms step
Sweep operation available |
| Line phase |
50 or 60Hz, Injection phase angle 0~359°,
1° step
Sweep operation available |
| External |
<EXT mode>
>10ms, Pulse width>1ms
TTL/Open collector negative
logic
|
<EXT mode>
>16ms, Pulse width>1ms
TTL/Open collector negative
logic
|
| Also functions for timing reference signals
input from an external injection unit |
| 1 shot |
Single pulse injection to the angle which
is specified by Line phase setting on the
power line, or Single shot without injection
power line. |
| Memory |
Up to 5 test settings |
| Power capacity of equipment under test |
AC 240V, DC60V, Single phase, DC60V 16A |
| Power supply |
AC100 ~ 240V 50/60H |
| Power consumption |
140VA |
| Operating temperature and humidity |
15~35°C / 25~75% (No dewing shall occur.) |
| Dimensions |
(W) 430 X (H) 249 X (D) 420 mm(Projections
excluded) |
| Weight |
Approx. 19kgs |
|
Included accessories
- Coaxial cable Model: 02-00013A (8 pcs)
- SG short plug Model: 02-00106A (1pc)
- Outlet panel Model: 18-00061B (1 pc)
- Terminal block type
- AC240V/16A DC60V/16A maximum
- Leaves the factory with this panel attached
to the main unit (INS-4020 or INS-4040)
- AC cable (1pc)
- Instruction manual (English / 1 pc)
Option: Injection unit Model: IJ-4050 Other options
The built-in injection circuitry has 16A
rating for single-phase AC. For
test exceeding
this current limit or 3-phase
application,
IJ-4050 shall be used.
This optional unit can extend
the EUT supply
voltage and current ratings up
to 3-phase
AC 415V/50A. In conjunction with
INS-4020/4040,
this unit can operate in the
EUT Line Synchronization
mode. |
|
SPECIFICATIONS
 |
Item |
Model IJ-4050 |
| Impulse input |
8kV max when the INS-4020/4040 output is
not terminated. |
| EUT power capacity |
3-phase, 5-wire (L1, L2, L3, N, PE) AC415V,
50A |
| Coupling mode selection |
By short plug connection |
| Zero cross detection |
Detects L1-L2 voltage and outputs synchronization
signal from the SYNC OUT connector |
| Dimensions and weight |
(W)430 x (H) 200 x (D) 535 mm (Projections
excluded)
Approx. 25.0 kgs |
|
|
