Discharge Gun GT-30R2KA/GT-30R3302KA
Discharge Gun GT-30R2KA / GT-30R3302KA
Conforming to ISO10605
GT-30R2KA Discharge Gun
Discharge gun stand (Model: PS-806) and Conversion Adaptor (Model:03-00074A) are optional accessories.
FEATURES
- Meets ISO10605 2nd edition>
- 150pF-2K ohm capacitor/resistor unit and 330pF-2K ohm capacitor/resistor unit included (GT-30R2KA package).
- All the 4 capacitor/resistor units included (GT-30R3302KA package).
SPECIFICATIONS
| Items | GT-30R3302KA | GT-30R2KA |
| Output voltage |
0.20~30.0kV ±5% (with ESS-S3011A/B3011A) 0.20~16.0kV ±5% (with ESS-L1611A) |
|
| Discharge mode | Air discharge and contact discharge | |
| Output polarity | Positive / negative | |
| Standard energy storage capacitor |
150 PF±10% , 330 PF ±10% |
|
| Standard discharge resistor | 330 ohm±10% & 2K ohm ±10% | 2K ohm ±10% |
| Charging resistor | Contained in the CR unit | |
| Cable length | 2 m | |
| Charged voltage hold time | 5 seconds or more | |
| Dimensions |
83.3(W) x 217.2(H) x 229.3 (D) mm (Discharge tip excluded) |
|
| Weight | Approx. 1300g (cable and high voltage connector included) | |
STANDARD ACCESSORIES
| GT-30R2KA (Set for 2K ohm Test under ISO 10605) | |||
| 2Kohm testing discharge cup 03-00072A |
Discharge tip 12-00007A (Conical)
For contact discharge test Conforming to IEC 61000-4-2 and ISO 10605
|
||
| CR unit 150pF-2k ohm 06-00074B
|
Discharge tip 12-00008A (Round)
For air discharge test Conforming to IEC61000-4-2 and ISO 10605 |
||
| CR unit 330pF-2K ohm 06-00076B
|
Discharge tip 12-00009A (SphericalΦ30mm)
Conforming to ISO 10605 |
||
|
|
|||
| GT-30R3302KA (Set for 330 ohm and 2K ohm Tests to ISO 10605) | |||
|
330 ohm testing discharge cup 03-00071A |
Discharge tip 12-00007A (Conical)
For contact discharge test Compliance Standards: IEC 61000-4-2 Ed1.2 & Ed2.0 ISO 10605 1st & 2nd Ed.
|
||
|
CR unit 150pF-330 ohm 06-00073B
|
Discharge tip 12-00008A (Round)
For air discharge test Compliance Standards: IEC 61000-4-2 Ed1.2 & Ed2.0 ISO 10605 1st & 2nd Ed. |
||
|
CR unit 330pF-330 ohm 06-00075B
|
Discharge tip 12-00009A (SphericalΦ30mm)
Compliance Standard: ISO 10605 2nd Ed. |
||
| 2Kohm testing discharge cup 03-00072A |
CR unit 150pF-2k ohm 06-00074B
|
||
| CR unit 330pF-2K ohm 06-00076A
|
|||
|
Instruction manual |
|||
COMBINATIONS OF DISCHARGE CUP AND CR UNIT
By replacing the discharge cup and CR unit, this product allows the single discharge gun to output the output current waveforms that support two types of test standards (IEC 61000-4-2 and ISO 10605). The combinations of the discharge cup and CR unit and their compliance test standards are as follows.
| Discharge Cup | CR Unit | Compliance Test Standard |
| Discharge Cup for 330 ohm test |
150pF-330 ohm |
IEC 61000-4-2 Ed1.2 ISO 10605 2nd Ed (330 ohm test) |
|
330pF-330 ohm |
ISO 10605 2nd Ed (330 ohm test) | |
| Discharge cup for 2k ohm test | 150pF-2k ohm | ISO 10605 1st Ed (2k ohm test) ISO 10605 2nd Ed (2k ohm test) |
| 330pF-2k ohm | ISO 10605 1st Ed (2k ohm test) ISO 10605 2nd Ed (2k ohm test) |
COMBINATIONS WITH ESD SIMULATORS
This product is a discharge gun used to perform electrostatic tests. Its available functions vary, depending on the simulator used in the combination with it.
| Simulator model | Connectivity/Availability | Functional restriction on this instrument |
| ESS-S3011A | Recommended combination | No functional restrictions |
| ESS-B3011A | ||
| ESS-S3011 | Recommended combination | No functional restrictions |
| ESS-B3011 | ||
| ESS-2000AX | Can be connected and used but some functions are not available. |
The following functions are not available.
Discharge detection |
| ESS-2002EX | ||
| ESS-2000 | ||
| ESS-2002 |
Designs and specifications are subject to change without notice.
