Top  >  Discontinue  >  ESD Simulator ESS-S3011/GT-30R (discontinued)

ESD Simulator ESS-S3011/GT-30R (discontinued)

Electrostatic Discharge Simulator ESS-S3011/GT-30R New 

 EN/IEC 61000-4-2 Ed2 & ISO 10605 Ed2 Compliant   

 SMART ESD simulator which supports all phases of the test (Pre to Post)

   Product catalog

 

ESD Simulator Model ESS-S3011 

ESS-S3011 & GT-30R 

  (Note: Discharge gun stand is an optional accessory.)

 

FEATURES

 

  • EN/IEC 61000-4-2 Ed2 Compliant 
  • ISO 10605 Ed2 Compliant    (Note: Optional gun head and CR units are required.) 
  • Pre-test 

        "3 pre-checking functions” taking the confirmable test into the account

        "CR constant indicator” to ensure correct attachment is in place

  • During test

        “Ten-key & Rotary knob” to ease the setting

        “Infra-red Remote Controller” to allow remote Generator setting

        “Discharge Detecting Function” to realize the air-discharge confirmation

        “Lightest Discharge Gun in the market” for better continuous operation

        “White LED light” to show Discharging points  

  •  After test

        “Control Software” for Test Result Reporting and PC Control

         (Scheduled to be downloaded from NoiseKen web-site)

  

SPECIFICATIONS

 ESD Simulator Main Unit Model : ESS-S3011 

Items ESS-S3011 specifications
Polarity Positive or negative
Output voltage

0.2 to 30.0kV +/-5% (30.5kV Maximum)

0.2 to 10kV: 0.05V step,  10.0 to 30.0kV: 0.1kV step

Repetition cycle

0.05s to 99.9s +/-10% / Manual

0.05s to 10.0s: 0.05s step,  10.0 to 99.9s: 0.10s step

No. of time of discharge 1 to 60,000 times /continuous
 Discharge mode Contac discharge / Air discharge
Radiation level mode Normal mode / Extra mode
Trigger mode Gun trigger / Main unit trigger / External trigger
Operation panel Color LCD / Push-buttons (Partially lighting)
Gun holder Standard attached (to hold the discharge gun Model GT-30R)
Radiation mode select switch Extra / Normal switching function built-in
Discharge detection Discharge detection function in air-discharge mode equipped
Pre-checking function Following 3 steps function equipped (by under operation. Not the calibration but just checking)
SETP1 High voltage output checking
STEP2 Withstanding voltage checking
STEP3 Discharge relay operation checking
CR & Gun head checking  CR constant and gun head recognizable (with an indicator to prevent the wrong combination)
IEC standard test mode

Contact discharge mode: 2.0, 4.0, 6.0, 8.0 kV step

Air discharge mode: 2.0, 4.0, 8.0, 15.0 kV step

Manual test mode

Contact/Air discharge mode: 0.20kV to 30.0kV

Sweep function available

Up to 50 units (test settings) storable

Sequence test mode

Seamless run of the selected test sequence

No. of steps per one sequence: up to 22 steps

No. of test sequences: up to 20

Warning lamp

Lights up while the HV circuitry is on.

Blinks while discharges are in progress.

Charging capacitor and resistance 150pF +/-10%, 330 ohm+/-10%  (built into Discharge Gun GT-30R)
Main unit charging resistance 10M ohm (53M ohm for combination with Discharge Gun GT-30R)
AUX connector

D-SUB 15 pin, female connector

Connection of Warning Lamp (optional)

Connection of Automatic ESD Eliminator (optional)

External interlock input

External trigger input

Optical communication connector Optic connector for PC communication (serial interface)
Power supply/ Power consumption 100V to 240V AC, 50Hz/60Hz +/-10%  75VA
Included accessories

Remote controller 13-00004A, Gun holder, Instruction manual

Dimensions and weight

 (W) 270 X  (H)312 X  (D)295 mm

Approx. 7.0kg (gun holder excluded)  , Approx. 7.5kg (gun holder included)  

 Discharge Gun Model :  GT-30R 

Items GT-30R specifications
Output voltage 30.5kV Max
Polarity Positive or Negative
Repetition cycle 0.05s and over   Note) Guaranteed value is 0.1s and over  (330pF and under)
Discharge mode Contact or Air
Charging resistor Built-in CR unit
Charge/Discharge capacitor & Discharge resistor Built-in CR unit
High voltage connector Composite connector of high voltage and signal line (male)  。ハNoiseKen custom)
Operation switch Discharge trigger
LED irradiator White LED light built-in for irradiating EUT 。ハFocusing point is the tip)
Included accessories

CR unit (150pf-330 ohm) 06-00073A

Conical discharge tip 12-00007A

Round discharge tip 12-00008A

Instruction manual  

Dimensions and weight

  (W) 83X  (H) 217 X  (D) 229 mm  (projection excluded)
Approx. 0.8kg (Cable and connector excluded)

Approx. 10.8kg (Cable included, connecter excluded)

Designs and specifications are subject to change without notice.