Electrostatic Discharge Simulator (ESS series) ESD SimulatorESS-B3011A & GT-30RA
Cost-oriented Basic model
Cost-oriented basic model ESD Simulator equipped with the light weight discharge gun.
The output voltage can be selected up to max. 30 kV and compliant to both EN / IEC 61000-4-2 Standard and ISO 10605 Standard.

Features
● “Pre-checking function” tfor performing a more reliable testing
● “CR constant checking function” (no indicator) to prevent incorrect unit attachment”
● “Discharge Detecting Function” to realize the air-discharge confirmation.
● “Lightest Discharge Gun in the market” to lighten the continuous operation.
● “White LED Irradiator” to facilitate the visualization of the discharging area.
● One-touch exchange of gun head and CR unit realized
* ISO 10605 compliant test performable with addition of the gun head and CR units (only with ESS-B3011A)■Discharge output waveform (IEC Standard)
Specifications
Parameter Specification Model ESS-B3011A Output voltage 0.20 kV ~ 30.0 kV ± 5% (30.5 kV max)
*0.20kV ~ 1.99kV ±10% 2.00kV ~ 30.0kV ±5%
~ 10.0kV : 0.01kV step 10.0 ~ 30.0kV : 0.1kV stepPolarity Positive / Negative Repetition cycle 0.05s ~ 9.99s ± 10%, 0.01s step / Manual Discharge No. of times 1 ~ 999 times, Preset 1 time step or continuous preset Discharge mode Contact discharge / Air discharge Trigger mode Gun trigger / Main trigger Operation panel Indicator : 5 x 7 Dot matrix LED / Operation : Push buttons (Partially lighting) Radiation mode select switch Extra / Normal switching function built-in Discharge detection Discharge detection function in air-discharge equipped. Pre-checking function High voltage output checking function
(by user operation. Not the calibration but just checking)CR & Gun head
checkingCR constant and gun head recognizable
(to prevent the wrong combination without indicator)IEC LEVEL Contact discharge mode : 2.0 kV, 4.0 kV, 6.0 kV and 8.0 kV step Switching function Air discharge mode : 2.0 kV, 4.0 kV, 8.0 kV and 15.0 kV step Warning lamp Lighting at voltage output from the generator.
Blinking at electro-static dischargingCharge capacitor / resistor 150 pF ±10%, 330 Ω ± 10% (Built-in CR unit for discharge gun GT-30RA) Charge resistor in generator 10 MΩ (Totally 53 Ω in combination with 43 MΩ in discharge gun)* Power supply / consumption AC 100 V ~ AC 240 V ± 10% 50 Hz / 60 Hz 62 VA Dimensions Generator : (W)270 mm x (H)263 mm x (D)200 mm
Discharge gun : (W)83.3 mm x (H)217.2 mm x (D)229.3 mmWeight Generator : Approx. 4.6 kg
Discharge gun : Approx. 1080 g (excluding cable and connector)* Remote control function not built-in.
* The constant depends on combination with CR unit for the discharge gun.
Contact
Repair, Inspection and Calibration
Customer Service CenterNew Purchase Consultation, Materials Request
Product Inquiry Form
Options
Catalogs and Technical Materials
Related Products
-
This is an Electrostatic Discharge Gun for performing electrostatic discharge immunity tests that comply with AEC-Q200 standard.
Discharging Gun for AEC-Q200 standard
read more -
Free you from the hassle of testing by the pre-check function and the weight reduction of the discharge gun
EMC test equipment to evaluate the resistibility of electronic equipment when energy charged on a human body or object is discharged to the electronic equipment.
This can be available for evaluating malfunctions or functions declines of electronic equipment against the ESD. Programmable simulator to ease some complicated tests. The output voltage is up to 30kV allowing to perform testing compliant to IEC61000-4-2 & ISO 10605 Standards.ESD Simulator ESS-S3011A & GT-30RA
read more -
Make your electrostatic testing easier!
This tester simulates the electrostatic discharge phenomenon from a charged human body and evaluates the resistance of electronic devices to electrostatic discharge.
Electrostatic discharge occurs when a charged human body approaches an operation panel, button switches, or housing of electronic devices. It generates a high-voltage, highfrequency noise which can cause malfunctions in the electronic devices.
Electrostatic testing reproducing noise caused by electrostatic discharge is one of the essential immunity tests to prevent troubles caused by noise in the market.ESD Simulator ESS-PS1 & GT-31S
read more
News
Contact
Repair, Inspection and Calibration
Customer Service CenterNew Purchase Consultation, Materials Request
Product Inquiry Form
-
ESD Simulator ESS-S3011A/GT-30RA
https://www.youtube.com/watch?v=kdKCHXaVhf8