Lightning Surge Simulator LSS-6330 series - NOISE LABORATORY CO.,LTD.

Lightning Surge Simulator (LSS) Lightning Surge Simulator LSS-6330 series

This simulator for evaluation of the resistance of electronic devices simulates "high-energy in-duced lightning noise" induced in distribution lines and communication lines due to the ground potential fluctuations caused by lightning strikes.

EMC Testing

Features

Features
read more
Features
- Compliant to IEC 61000-4-5 Ed.3, IEC61000-4-12 Ed.3 (RINGWAVE 100kHz) and ANSI IEEE62-45 (2002)*
- Equipped with pre-check function for a simple pre-start inspection of the simulator (not calibration)
- Equipped with output waveform monitor terminal: waveform applied to EUT during testing can be observed on oscilloscope.
- Equipped with 2 test modes. Standard Test mode with IEC 61000-4-5 standard preset test conditions and Manual Test mode allowing arbitrary test conditions setting for easy settings ac-cording to the application.
- Optional PC remote control software is available for supporting lengthy lightning surge testing.
- Employs MPU control that simplifies continuous testing: surge output, waveform switching, po-larity switching, etc. can be performed automatically.
＊For Ring Wave coupling, simultaneous application is possible only for the Basic test type with PE as surge COM.
Simple pre-start inspection with the equipped pre-check function

Before, pre-start inspection required using two high-voltage probes and an oscilloscope capable of differential measurement for the output waveform verification.
read more
Simple pre-start inspection with the equipped pre-check function
Before, pre-start inspection required using two high-voltage probes and an oscilloscope capable of differential measurement for the output waveform verification. Now, with the LSS-6330 you can pre-check the presence of output simply by connecting a dedicated cable to the main body of the simulator.
( Check available at SURGE OUTPUT / EUT LINE OUTPUT )
Intuitive connection panel

Applied phase displayed on the front panel
read more
Intuitive connection panel
Applied phase displayed on the front panel
Equipped with an intuitive connection front panel helping prevent misconnection of power cables during the test.
Optional Outlet boxes are also available for easier connection.
Emergency stop button and interlock terminal ensuring safety

Equipped with operation safety functions in both hardware and software.
read more
Emergency stop button and interlock terminal ensuring safety
Equipped with operation safety functions in both hardware and software. Safety connection sockets as well as emergency stop switch and interlock terminal secure high operation safety regarding EUT connection. Using optional “safety fence” and “EUT protection box” allows ensuring further safety.
PC Software available (option) For Remote Test Control (14-00053B)

Allows setting test conditions, saving test results and test history, exporting test reports, etc.
read more
PC Software available (option) For Remote Test Control (14-00053B)
Allows setting test conditions, saving test results and test history, exporting test reports, etc.
Waveform verification through "output waveform monitor terminal”

In response to multiple requests from our customers, we equipped the monitor terminal allowing to verify the injected waveform on an oscilloscope.
read more
Waveform verification through "output waveform monitor terminal”
In response to multiple requests from our customers, we equipped the monitor terminal allowing to verify the injected waveform on an oscilloscope. Even without the oscilloscope, the test panel displays applied voltage and current parameters.
Front panel

read more
Front panel
Multilingual localization

Multilingual touch panel display supports easy and sure test setting.
read more
Multilingual localization
Multilingual touch panel display supports easy and sure test setting. English, Chinese, Korean and Japanese languages available.

back to list

Specifications

Model	Specifications
LSS-6330-A20A	left picture: single phase 20A type
LSS-6330-B63A LSS-6330-C63A	right picture: three phases 63A type （up: surge generating unit, below: CDN） * C63 does not include the Ring Wave

■ Surge generator unit　LSS-6330-A20A / B63A / C63A common

Parameter	Specifications		Notes
Surge Waveform	1.2/50μs-8/20μs combination 10/700μs-5/320μs combination RING WAVE		※RING WAVE only for A20A and B63A
1.2/50μs-8/20μs combination	Open voltage	0.5kV 〜 6.7kV ±10%	Coupling circuit：18μF Cable length：One side 0.5m
	Front time	1.2μs±30％
	Time to half-value	50μs±20％
	Short-circuited current	250A 〜 3350A ±10％
	Front time	8μs ±20％
	Time to half-value	20μs ±20％
10/700 μs-5/320μs combination	Open voltage	0.5kV 〜 6.7kV ±10%	Cable length：One side 0.5m
	Front time	10μs ±30％
	Time to half-value	700μs ±20％
	Short-circuited current	12.5A 〜 167.5A ±10％
	Front time	5μs ±20％
	Time to half-value	320μs ±20％
RING WAVE ※for A20A and B63A only	Open voltage	0.25kV 〜 6.6kV ±10%	Cable length：One side 0.5m
	Front time	0.5μs ±30％
	Frequency	100kHz ±10%
	Waveform envelop	Pk2 = 40% ＜ Pk1 < 110% Pk3 = 40% ＜ Pk2 < 80% Pk4 = 40% ＜ Pk3 < 80%
	Short-circuited current	8.3 〜 220A ±10%（30Ω） 20.8 〜 550A ±10%（12Ω）
	Front time	0.2 〜 1μs
Polarity	+/-
Output impedance	2Ω ±10%		1.2/50μs waveform
	40Ω ±10%		10/700μs waveform
	12Ω ±20%、30Ω ±20%		RING （selectable)
Surge generation circuit	Floating
Minimum charging time	0.0kV 〜 4.0kV：5 sec 4.1kV 〜 6.7kV：10 sec		1.2/50μs waveform
	0.0kV 〜 4.0kV：10 sec 4.1kV 〜 6.7kV：15 sec		10/700μs waveform
	0.0kV 〜 4.0kV：1 sec 4.1kV 〜 6.6kV：3 sec		RING WAVE
Communication fuction	RS-232C compliant Optical connector		Optional
Communication fuction	External CDN control		※only for B63A and C63A
Emergency stop	Push-lock button switch（Test STOP, High voltage OFF, EUT Line switch SHUT OFF)
Interlock function	External connection status detection
Emergency lamp	Red LED blinking after start the tests
Emergency lamp connector	Equiped with emergency lamp connector. Emergency lamp turns on after the test start.
EUT Fail	３ports
Voltage monitor	BNC output、2000V/V ±10％ Accuracy：±10％ vs. actual output		Waveform not guaranteed
Current monitor	BNC output、1000A/V ±10％ Accuracy：±10％ vs. actual output		Waveform not guaranteed
Phase angle control	0°〜360°±10°		EUT power AC90V Min. 50Hz/60Hz ±10％
Trigger input	asychronous , synchronized to AC line 0°~360° / 1° step, external input
Power supply	AC100V 〜 AC240V ±10％　50Hz / 60Hz ±10％
Operational environment	Temperature：15 〜 35℃ Humidity：25 〜 75％RH
Dimensions	LSS-6330-A20A：(W)430 x (H)349 x (D)530 mm LSS-6330-B63A / LSS-6330-C63A surge generating unit：(W)430 x (H)349 x (D)530 mm		protrusions excluded
Weight	LSS-6330-A20A：approx 50kgs LSS-6330-B63A surge generating unit：approx 40kgs LSS-6330-C63A surge generating unit：approx 35kgs

■ CDN Output Unit　LSS-6330-A20A

Parameter	Specifications		Notes
Surge Waveform	1.2/50μs-8/20μs combination,RING WAVE
1.2/50μs-8/20μs combination	Open voltage	0.5kV 〜 6.7kV ±10%	Coupling circuit：18μF Cable length：One side 0.5m Line input side open
	Front time	1.2μs ±30％
	Time to half-value	50μs ±20％
	Short-circuited current	250A 〜 3350A ±10％
	Front time	8μs ±20％
	Time to half-value	20μs ±20％
	Open voltage	0.5kV 〜 6.7kV ±10%	Coupling circuit：10Ω+9μF Cable length：One side 0.5m Line input side open
	Front time	1.2μs ±30％
	Time to half-value	50μs +10μs /-25μs
	Short-circuited current	41.7A 〜 558A ±10％
	Front time	2.5μs ±30％
	Time to half-value	25μs ±30％
RING WAVE	Open voltage	0.25kV 〜 6.6kV ±10%	Coupling circuit：4.5μF Cable length：One side 0.5m Line input side open
	Front time	0.5μs ±30％
	Frequency	100kHz ±10%
	Waveform envelop	Pk2 = 40% ＜ Pk1 < 110% Pk3 = 40% ＜ Pk2 < 80% Pk4 = 40% ＜ Pk3 < 80%
	Short-circuited current	20.8 〜 550A±10%
	Front time	0.2 〜 1μs
Power Capacity for EUT line	AC240V/20A MAX 50/60Hz、DC125V/20A MAX
Decoupling coil	1.5mH
Voltage dip	Less than 10% of the rated voltage when the rated current is energized		at the AC CDN unit output terminal
Residual voltage	Less than 15% of the max injected voltage or less than double of the power line rated voltage (peak value)

■ CDN Output Unit　LSS-6330-B63A / LSS-6330-C63A

Parameter	Specifications		Notes
Surge Waveform	1.2/50μs-8/20μs combination,RING WAVE		※RING WAVE only for B63A
1.2/50μs-8/20μs combination	Open voltage	0.5kV 〜 6.7kV ±10%	Coupling circuit：18μF Cable length：One side 0.5m Line input side open
	Front time	1.2μs ±30％
	Time to half-value	50μs ±20％
	Short-circuited current	250A 〜 3350A ±10％
	Front time	8μs ±20％
	Time to half-value	20μs ±20％
	Open voltage	0.5kV 〜 6.7kV ±10%	Coupling circuit：10Ω+9μF Cable length：One side 0.5m Line input side open
	Front time	1.2μs ±30％
	Time to half-value	50μs +10μs /-25μs
	Short-circuited current	41.7A 〜 558A ±10％
	Front time	2.5μs ±30％
	Time to half-value	25μs ±30％
RING WAVE	Open voltage	0.25kV 〜 6.6kV ±10%	Coupling circuit：4.5μF Cable length：One side 0.5m Line input side open
	Front time	0.5μs ±30％
	Frequency	100kHz ±10%
	Waveform envelop	Pk2 = 40% ＜ Pk1 < 110% Pk3 = 40% ＜ Pk2 < 80% Pk4 = 40% ＜ Pk3 < 80%
	Short-circuited current	20.8 〜 550A±10%(12Ω)
	Front time	0.2 〜 1μs
Power Capacity for EUT line	AC600V/63A MAX 50/60Hz、DC125V/63A MAX
Decoupling coil	1.5mH
Voltage dip	Less than 10% of the rated voltage when the rated current is energized		at the AC CDN unit output terminal
Residual voltage	Less than 15% of the max injected voltage or less than double of the power line rated voltage (peak value)
Phase angle control	0°〜360°±10°EUT power supply AC90V min. 50Hz / 60Hz ± 10%
Power supply	AC100V 〜 AC240V ±10％　50Hz / 60Hz ±10％
Operational environment	Temperature：15 〜 35℃ Humidity：25 〜 75％RH
Dimensions	(W)430 x (H)695 x (D)686 mm / approx 135kgs		protrusions excluded

■ Included Accessories（LSS-6330-A20A）

Item	Quantity	Notes
AC cable	1
Line output cable	3	1.5m, Plug - M6
FG cable（05-00070A）	1	2m, M6 - M6
Coaxial cable for monitoring（02-00128A）	1	1m, BNC - BNC
Interlock connector	1
Precheck cable for Surge output terminal	1	1m, plug - plug
Precheck cable for Line output terminal	1	1m, plug - plug
Line input cable	1set	1red, 1black, 1green/yellow
Surge output cable	2	1.5m, Plug - Alligator clip
Instruction manual	1
Accessory bag	1

■ Included Accessories（LSS-6330-B63A / LSS-6330-C63A）

Item	Quantity	Notes
AC cable	2
Line output cable	5	1.5m, Plug - M6
Surge input cable	1	connector cover red & black
FG cable（05-00070A）	2	2m, M6 - M6
Coaxial cable for monitoring（02-00128A）	1	1m, BNC - BNC
Interlock connector	1
Precheck cable for surge output terminal	1	1m, plug - plug
Precheck cable for line output terminal	1	1m, plug - plug
Interlock cable	1
FG connection short bar	1
Optical cable	1
Line input cable	1set	3red, 1black, 1green/yellow
Surge output cable	2	1.5m, Plug - Alligator clip
Instruction manual	1
Accessories bag	1