Optional equipment for the SG-7040A Series to carry out supply interruption test with <1μs rise/fall time requirement.

Clamp used for the Inductive coupling clamp (ICC) test method provided in ISO 7637-3 Standard. Calibration fixture (FCC-BCICF-1) is also available.
* The left photo is the figure including the calibration fixture.

Ground offset transformer for conducting the CI250 test specified in the FORD standard "EMC-CS-2009".
The test is performed in combination with the DC voltage fluctuation test system (SG-7040A System).

Harness injection fixture to perform RI130 / RI150 test required in FORD Standard EMC-CS-2009
(Allows to perform RI130 test in combination with ISS-T1321).

The attenuator for observing high frequency and high voltage pulses of Test Pulse 3a / Test Pulse 3b of ISS-7630.
50 Ω 20 dB ATT x 2 (Pulse 3a / Pulse 3b)

● Compatible model: ISS-7630、ISS-7800 series

The attenuator for observing high frequency and high voltage pulses of Test Pulse 3a / Test Pulse3b of ISS-7630.
2.5 kΩ 40 dB ATT (Pulse 3a / Pulse 3b)

● Compatible model: ISS-7630、ISS-7800 series

A set of resistor and attenuator for observing the pulse of Test Pulse 1 / Test Pulse 2a / Test Pulse
2b / Test Pulse 3a / Test Pulse 3b / Test Pulse 5a of ISS-7800 series.
1 Ω resistor, 2 Ω resistor, 10 Ω resistor, 50 Ω resistor, 2.5 k Ω 40 dB ATT, 50 Ω 20 dB ATT × 2

●Compatible models: ISS-7800 series
* Resistors can also be purchased individually.

Coupling clamp for testing for lines other than supply lines. Capacitively couples 3a and 3b pulses into the lines under test.
Contents: Coupling clamp, BNC Coaxial cable 0.5m, BNC coaxial cable 0.1 m, 50Ω 5W terminator, Metal fasteners

●Compatible model : ISS-7630、ISS-7800 series